StorCase Technology SCSI-to-SCSI Single RAID - Manual (Page 73)

DXIFS-160/RAID User's Guide - Rev. B00 StorCase Technology, Inc.
Appendix C - Troubleshooting 63
Using the Utility Menu
The Utility Menu allows the user to initialize the controller if it had a previous configuration. It
also allows the user to clear the battery backup if the controller is using battery backup (and
the data is not needed).
To run the Utility Menu, follow these steps:
1. Reboot the controller and hold down the spacebar at the prompt (refer to section "Using
the Flash Utility" for further information). The Flash Utility menu will appear.
2. Select Option 6 - Utility Menu
3. Enter the number of the utility desired.
Event Logs
(Figure C-1)
NOTE: Event numbers reset to 0 after 999 events have been logged.
There are two different ways to view Event Logs. To view events one at a time:
1. Select Event Log Menu from the System menu.
2. Select View Event Log from the Event Log Menu.
106:082400 05:45
AD OK
IFS_61
Event Number
Type of Event
Date
Time
Figure C-1: View Event Log Screen
3. Use the é and ê buttons to scroll through the list of events. The terminal will
automatically display all details.