StorCase Technology SCSI-to-SCSI Single RAID - Manual (Page 29)

DXIFS-160/RAID User's Guide - Rev. B00 StorCase Technology, Inc.
Configuration 19
Figure 12: Array Statistics
Abort Initialization
This command stops the initialization process during an array initialization. The array is marked
as offline and cannot be used. The drives will remain array members and the array must be
deleted before the drives can be used again.
Verify Function
The Verify function allows the user to verify data on the specified array (RAID 3, 4, 5, 50, and
mirrored arrays only).
RAID 3, RAID 4, RAID 5, and RAID 50 - Verifies all parity blocks in the selected
array and corrects any bad parity.
Mirrored - Compares the primary and secondary drives. If a mismatch occurs,
the primary is copied to the secondary.