Display drives – StorCase Technology SCSI-to-SCSI Single RAID User Manual
Page 42
32
Configuration
StorCase Technology, Inc.
DXIFS-160/RAID User's Guide - Rev. B00
Display Drives
(Figure 20)
This command displays the following:
Channel
SCSI ID
Size
Manufacturer
Model number
Firmware revision number
Drive state - array number, dedicated spare, pool spare, leftover, available
Array number - this array's sequential position in the controller's array list
Member number - this drive's sequential position in the array
Utility running - Expand, Verify, etc.
Drives that are not members of any array are displayed as Leftover or Available. Leftover
drives contain metadata from a previous array and can arise if drives are pulled and reinserted.
To clear leftover metadata, use the Clear Metadata command under the Utility Menu. Refer
to section "Clear Metadata" for further information.
Figure 20: Display Drives Screen
- DE100i-SW (35 pages)
- DE50 (33 pages)
- DE50 (27 pages)
- DE110 (33 pages)
- DE110 (2 pages)
- DE110 (31 pages)
- DE110 (27 pages)
- DX115 (25 pages)
- DE75i-A (31 pages)
- DE75i-A66 (29 pages)
- DE75i-A100 (31 pages)
- SATA DE75 (28 pages)
- DE75i-S (31 pages)
- DE75i-SW (33 pages)
- DE75i-SWC (33 pages)
- DE75i-SW160 (29 pages)
- S20A114 (29 pages)
- DE75i-SWC160 (29 pages)
- DE90i-A (29 pages)
- DE90i-A66 (23 pages)
- DE90i-A100 (23 pages)
- DE90i-S (25 pages)
- DE100i-A (33 pages)
- DE100i-A66 (29 pages)
- DE100i-A100 (29 pages)
- DE100i-CSWTN (2 pages)
- DE100i-S (39 pages)
- DE100i-SWD (33 pages)
- DE100i-SWU2 (37 pages)
- DE100i-SWCU2 (33 pages)
- DE100i-SWU2X (35 pages)
- DE100i-SW160 (35 pages)
- S20A102 (33 pages)
- DE100i-SWC160 (39 pages)
- Ultra320 DE100 (31 pages)
- DE110 (29 pages)
- DE110 (27 pages)
- DE110 (31 pages)
- DE150i-SWC (33 pages)
- DE200i-S (33 pages)
- DE200i-CSWTN (2 pages)
- DE200i-SW (35 pages)
- DE200i-SWU2 (37 pages)
- DE200i-SWCU2 (35 pages)
- S20A108 (33 pages)