SpectraCal Cine-tal DAVIO - Manual (Page 5)

V1.2 2013.04.23
Bypass Davio 3D LUT
On the Davio Control 3D LUTs tab:
10. Under 3D LUT Source, select the Profile Generator.
11. Select the desired 3D LUT slot and set it either to a unity LUT or to Unloaded.
Or, from the Davio front panel
a. Right until LCD reads “3D LUT 1”
b. Down - LCD reads “Select 3D LUT”
c. +/- until LCD reads “Unity LUT filename ”
d. Right until LCD reads “3D LUT 1 Source”
e. +/- until LCD reads “Profile Generator”
Set 3D LUT Source to Profile Gen.
Set desired 3D LUT Slot to Unity or
Unloaded.