SpectraCal Cine-tal DAVIO - Manual (Page 4)

V1.2 2013.04.23
Configure Davio Output Color Space
On the Davio Control Outputs tab:
8. Under Color Space for all Davio outputs, select Full range. (The Davio Inputs and Outputs need to be set
for Full range during 3D LUT calibration, even if you are calibrating for SMPTE range operation, and
must be left in Full range, even for operation in a SMPTE signal path.)
9. Under 1D LUT for all Davio outputs, select “Reset.”
Or, from the Davio front panel
a. Right until LCD reads “SDI Out 1”
b. Down then right LCD reads “CSC Matrix”
c. +/- until LCD reads “CSC Matrix YCbCr Full”
d. Right until LCD reads “1D LUT File”
e. +/- until LCD reads “1D LUT File Reset”
f. (Repeat for SDI Output 2 and HDMI Output)
Select Outputs tab.
Select YCbCr Full - out 1&2
Select DL RGB Full – HDMI
Set all 1D LUTs to “Reset”