SpectraCal Cine-tal DAVIO - Manual (Page 2)

V1.2 2013.04.23
2. Davio Initial Software Setup
To set up a Davio for 3D LUT color calibration:
1. Install the Davio Control application software on your computer.
(See Davio Software Quick Start on installing Davio Control).
2. Start the Davio Control software.
On the Davio Control software DAVIO(s) tab:
3. Click the Discover button to find all Davios on the network, and then click Connect.
4. Select either the 1040 or 1050 Davio package.
5. Record the unit’s IP address.
Click on Discover to find
Davios on Network, then
Connect.
Select 1040 or 1050 on
Package Select.