SpectraCal Cine-tal DAVIO - Manual

V1.2 2013.04.23
Cine-tal DAVIO
CalMAN Setup Guide
CalMAN takes advantage of Davio’s 3D LUT processor features, as well as the internal test pattern Profile
Generator, to calibrate up to a 65x65x65 3D cube LUT. This quick start guide assists you in setting up the Davio for
use with the CalMAN Color Cube workflow.
Recommended CalMAN Workflows:

CalMAN V5.1.1 or later

SI Basic workflow to optimize panel or projector Picture controls.

Color Cube workflow to create display calibration 3D LUT for Davio.
Required Davio Software:

Davio Control software, version 2.0, or later

Davio 1040 or 1050 system software package
Davio Control Connection:

Ethernet straight through (standard) cable
1. Davio Hardware Setup
CalMAN V5.1.1 and later automatically configures the Davio as both the Profile Generator (Test Pattern
Source) and the Display Processor (Display Control), without connecting an external jumper cable. The
Monitor under Calibration can be connected to either SDI OUT (1) or HDMI OUT.
A. Connect both the Davio and the CalMAN computer to a DHCP-capable network router with standard
Ethernet cables.
B. Connect the Davio and the display to be calibrated as follows: