SpectraCal VideoForge Classic - Manual

17544 Midvale Ave. N. Ste 100, Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
AV Foundry VideoForge
Digital Video Generator
Quick Start Guide
Thank you for purchasing an AV Foundry VideoForge Digital Video Generator. In your package with the
VideoForge, you will find the following accessories:
- HDMI cable
- USB-A to USB-Mini Cable
- Power Supply
The power supply is a “universal” design, which transforms mains supply voltages used throughout the
world.
The software needed to support the VideoForge is available from the AV Foundry web site:
www.avfoundry.com
Download and install the AV Foundry Tools package, which includes a detailed VideoForge User Guide.
To connect and use your VideoForge:
1. Power on the VideoForge.
2. Connect the VideoForge to a USB port on your PC via the supplied USB cable.
3. When Windows prompts you to install a driver, choose “Install from Specific Location” and
browse to the directory on your hard drive where you installed the VideoForge software kit.
4. When the driver is successfully installed, you can verify correct operation of the VideoForge by
browsing to its administrative interface with a web browser. The default IP address of the
VideoForge is 172.24.24.20.