Pitney Bowes DM550 Series - Manual (Page 145)

DM500™ and DM550™ Series Digital Mailing System Operating Guide
SV61436 Rev. D 9 - 9
9. After cleaning the wick
and tank, place the
shield on the wick, mak-
ing sure that there is no
gap between the shield
and the surface of the
wick.
10. Place the shield and
wick assembly in the
moistener tank and push
down on the shield to
push the assembly into
the tank.
11. Replace the moistener
tank and gently slide it
back into the machine,
taking care not to crimp
the supply tubing. To
measure the solution,
position a ruler as
shown in the picture on
the right.