Pitney Bowes DM550 Series - Manual (Page 144)

9 • Maintaining and Updating
9 - 8 SV61436 Rev. D
5. Remove the wick, using
the metal shield to gently
pry it out of the moistener
tank.
6. Drain the moistener tank
over the front of the
machine into a receptacle
as shown here.
7. To clean the moistener tank, remove the E-Z Seal® Sealing Solution
supply tube and wipe out the tank with E-Z Seal® solution.
Clean the wick by holding it under running water.
8. Push the supply tube back onto the moistener tank nozzle. Push the
tube back on as far as it will go to prevent leaking.
Metal shield