Parr Instrument 6400 - Manual (Page 47)

6400
Calorimeter Instruction Manual
5-15
Next Auto Sample ID Number:
Establishes the initial sample number for a series of tests and then shows the
next sample ID which will be assigned. Used when the Automatic Sample ID is
set to ON. Press this key to access a sub-menu for entering a numeric
increment.
Auto Sample ID Increment:
Establishes the increment between sample numbers; used when the Automatic
Sample ID is set to ON. Press this key to access a sub-menu for entering a
numeric increment.
Sample Weight Warning Above:
This key displays and leads to a sub-menu used to set the maximum allowable sample
weight (including spike) in grams. A warning will be given if sample weights above this
value are entered.
Spike Weight Entry Mode:
This key steps through the options for entering spike weights either manually through the
touch screen, balance port or network.
Sulfur Entry Mode:
This key steps through the options for entering the sulfur correction value either
manually through the touch screen or automatically through the balance port
Moisture Entry Mode:
This key steps through the options for entering the moisture correction value either
manually or through the touch screen or automatically through the balance port.
Auto Preweigh ID Controls:
Accesses sub-menu, used to automatically assign Sample ID numbers when a series of
samples are preweighed ahead of the time they are actually tested.
Automatic Preweigh ID:
ON/OFF toggle for this feature.
Automatic Preweigh ID Prefix:
An entry here will be used as a prefix for all pre-weigh sample IDs.
Next Automatic Preweigh ID Number:
Shows the next Sample ID which will be assigned and is used to enter the
beginning Sample ID of any series
Automatic Preweigh ID Increment:
Establishes the increment between samples.