Parr Instrument 6400 - Manual (Page 100)

6400
Calorimeter Instruction Manual
14-1
TABLES
Table 2 - Default Settings
Calorimeter Operation
Operating Mode Determination
Bomb Installed/EE 1/940
Heater and Pump OFF
Operating Controls
Method of Operation Dynamic
Reporting Units btu/lb
Use Spiking Correction OFF
“OTHER” Multiplier 4.1868
Calibrate Touchscreen
LCD Backlight Timeout(s) 1200 S
LCD Contrast 30%
Print Error Messages ON
Language English
Spike Controls
Use Spiking OFF
Heat of Combustion of Spike 6318.4
Use Fixed Spike OFF
Weight of Fixed Spike 0.0
Prompt for Spike before Weight OFF
Bomb Rinse Tank Control
Report Rinse Tank Empty ON
Rinse Tank Capacity 150
# Rinses Left 150
Reset Rinse Tank Counter
Rinse Time 25
Rinse Flush Time 20
Clear Time 100
# of Rinse Cycles 3
Program Information and Controls
Date XX/XX/XXXX
Time XX:XX
Software and Hardware Info
Settings Protect OFF
User/Factory Settings
Feature Key
Bomb Type Select
User Function Setup
Cold Restart
User Factory Settings
User Setup ID 64-1138
Reload Factory Default Settings
Reload User Default Settings
Save User Default Settings
Calibration Data & Controls
Calibration Run Limit 10
EE Max Std Deviation 0.0
Heat of Combustion
of Standard
6318.4
Bomb Service Interval 500
Use Bomb 1
Bomb 1 Through 4
EE Value 940
Protected EE Value OFF
Thermochemical Corrections
Standardization
Fixed Fuse Correction ON 50.0
Fixed Acid Correction ON 8.0
Fixed Sulfur Correction ON 0.0
Determination
Fixed Fuse Correction
ON 50.0
Fixed Acid Correction ON 8.0
Fixed Sulfur Correction OFF 0.0
Calculate Net Heat of Combustion OFF
Calculation Factors
Acid Value is Nitric Acid Only ON
Acid Multiplier 0.0709
Sulfur Value is Percent ON
Sulfur Multiplier 0.6238
Fuse Multiplier 1.0
Use Offset Correction (ISO) OFF
Offset Value 0.0
Fixed Hydrogen OFF 0.0
Hydrogen Multiplier 50.68
Dry Calculation OFF
Dry Calculation
Dry Calculation
OFF
Fixed Moisture OFF 0.0%
Moisture Multiplier 5.83