Parr Instrument 6400 - Manual (Page 33)

6400
Calorimeter Instruction Manual
5-1
MENU DESCRIPTIONS
Note:
Keys which make global changes to the setup of the calorimeter contain a
YES or NO response to make certain that the user wishes to proceed.
This two step entry is intended to prevent inadvertent global program
changes.
Main Menu
Escape Key:
Selecting the Escape key on any
menu will return you to the menu one
level up.
Main Menu Key:
Selecting the Main Menu key on any
menu will return you to the screen
pictured on the right of this page.
Start Key:
Press the Start key to begin any
Determination or Standardization run.
Report:
Press the Report key to begin the reporting process.
Help:
Press the Help key on any screen to display the explanation text for that screen.
Calorimeter Operation Menu
The Calorimeter will normally be operated from the Calorimeter Operation Menu, although
tests can always be started from any menu screen.
Operating Mode:
Sets the operating mode by toggling
between Standardization (for
instrument calibration) and
Determination (for test runs).
Temperature Graph:
Press this key to display a real-time
plot of the bucket and / or jacket
temperature on the Temperature vs.
Time Plot screen.
Bomb / EE:
Used to identify the bomb presently
installed in the Calorimeter and its EE
value.