Parr Instrument 6400 - Manual (Page 39)

6400
Calorimeter Instruction Manual
5-7
ƒ User Setup ID
Used to enter a unique identifier for recalling user settings. Parr offers
a unique program within the 6400 identified as “63-FAST”. The
program will “overlay” the factory settings and shorten the run time by
approximately 2 minutes however the user should be aware that a loss
of precision will occur.
ƒ Reload Factory Default Settings:
Used to erase all of the settings and restore the factory default
settings.
ƒ Reload User Default
Settings:
Used to restore the
user’s setup should
the program in the
instrument be
corrupted for any
reason.
ƒ Save User Default
Settings:
Used to record the
setup to the memory
once the user has
configured the
instrument to their operating requirements.
Feature Key:
This key displays a screen which allows the user to input a code to access special
calorimeter features such as the bar code capabilities or remote calorimeter
operation.
Bomb Type Select:
This key toggles through the different bomb models available for the calorimeter.
When the user chooses a bomb, the instrument must be re-booted to load the
correct version of the software. (Note that the calorimeter will not let you exit this
function without re-booting the system).
User Function Setup:
This key leads to sub menus that support the configuration of five factory / user
definable function keys. The function keys are accessible from the Diagnostics page.
Cold Restart:
This is essentially the same as cycling power on the unit. All valid test data will be
retained during this cold restart procedure.