GoDEX EZPL - Manual (Page 52)

47
Qx,y,width,height - Pattern command
Syntax Qx,y,width,height
Data...
Parameters x = Hori. of left-bottom pos. (unit: dots).
y = Vert. of left-bottom pos. (unit: dots).
width = width of graphic (unit: byte)
height = height of graphic (unit: dots)
(data length = width x height)
Description
4
20
1 2 3 4
5 6 7 8
77 78 79 80
Data send out
1 2 3 4 ......77 78 79 80
width = 4 ; height = 20
(data length: 4x20 = 80)
(refer to page75)
Rx,y,x1,y1,lrw,ubw – Rectangle drawing
Syntax Rx,y,x1,y1,lrw,ubw
Parameter x = left-upper Hori .pos. (unit: dots)
y = left-upper Vert. Pos. (unit: dots)
x1 = right-bottom Hori. Pos. (unit: dots)
y1 = right-bottom Vert. Pos. (unit: dots)
lrw = thickness of left, right border
(unit: dots)
ubw = thickness of upper bottom border
(unit: dots)
(x,y)
lrm
ubw
(x1,y1)
Description Draw a rectangle in the label
Th|m|s – Internal real-time setting
Syntax Th|m|s
Parameter h = Hour format ( 2 digits, 00 ~ 23)
m = Minute format ( 2 digits, 00 ~ 59)
s = Second format (2 digits, 00 ~ 59)
| = Partition (It can be any separator between dec. 32 to 63 of ASCII).
Description Define the time layout for internal real-time clock