GoDEX EZPL - Manual (Page 17)

12
^XSET,ACTIVERESPONSE,n - Active response
Syntax ^XSET,ACTIVERESPONSE,n
Parameter n = 0, do not return the "ERRORxx" message to PC
n = 1, return the error message (default). When door open, ribbon out… or other error
occur, the printer will return the "ERRORxx" message to PC
Description Set the Active Response function on/off. The error code includes:
01 – Paper out
02 – Paper jam or missing gap
03 – Ribbon out
04 – Print head is up
05 – Rewinder full
06 – Memory is full
07 – Filename can not be found
08 – Filename duplicate
09 – Syntax error
10 – Cutter JAM
11 – CF Card not found
*Note: before turning on the error code response function, the “Set immediate
response” function should be turned on (send “^XSET,IMMEDIATE,1” to printer).
Example Procedure :
PC to Printer ^XSET,ACTIVERESPONSE,1
Printer action Door open
Printer to PC ERROR04
ERROR04 is means Door open
^XSET,ACTIVEMESSAGE,n - turn on/off auto print error message function
Syntax ^XSET,ACTIVEMESSAGE,n
Parameter n = 0, disable ; = 1, enable this function.
Description
It will print error message while below error occurred:
 File System Full
 File Name Not Found
 Duplicate Name
 Command Not Recognized
 Extended Memory Not Found
^XSET,ALIAS,string - Printer alias name used for the recognition of each network printer
Syntax ^XSET,ALIAS,string
Parameter
Length<16Byte
If does not input “string”, it will response the existing setting in printer.
Description Setup printer alias name to recognize each printer under network.
^XSET,AUTOTPHTEST,x - AUTO PRINTING SELF TEST PAGE WHEN PRINTER TURNED ON
Syntax ^XSET,AUTOTPHTEST,x
Parameter x = 0 disable , = 1 enable this function
Description
Set Enable. Printer would be auto printing self-test page when turn on printer
(example refer to ~T command )
^XSET,BUZZER,n - Set remind buzzer on/off
Syntax ^XSET,BUZZER,n
Parameter n = 0, remind buzzer function off
n = 1, remind buzzer function on
Description This command can set printer remind buzzer on/off. When download graphic or font,
printer will beep once. And use this command can turn off the remind buzzer
function. But it can’t set error buzzer on/off.