GoDEX EZPL - Manual (Page 32)

27
~S,CHECK - Status immediate response command
Syntax ~S,CHECK
Parameter None
Description The command will show the status of printer in “aa “ format.
aa = printer status information:
00 – Ready
01 – Media Empty or Media Jam
02 – Media Empty or Media Jam
03 – Ribbon Empty
04 – Printhead Up ( Open )
05 – Rewinder Full
06 – File System Full
07 – Filename Not Found
08 – Duplicate Name
09 – Syntax error
10 – Cutter JAM
11 – Extended Menory Not Found
20 – Pause
21 – In Setting Mode
22 – In Keyboard Mode
50 – Printer is Printing
60 – Data in Process
*Note: Before using this command, the “^XSET,IMMEDIATE” (Set immediate response
on/off) command should be turned on.
Example
Procedure:
PC to Printer ^XSET,IMMEDIATE,1
Printer action Door open
PC to Printer ~S,CHECK
Printer to PC 04
** 04: Door open