GoDEX EZPL - Manual (Page 42)

37
B5n,x,y,narrow,segment,height,rotation,readable,data - lay out GS1 Databar
Syntax Bt,x,y,narrow,wide,height,rotation,readable,data
Parameter n = The type of GS1 Databar, see table below.
"n" GS1 Databar type "n" GS1 Databar type
0 GS1 Databar Omnidirectional 4 GS1 Databar Limited
1 GS1 Databar Truncated 5 GS1 Databar Expanded
2 GS1 Databar Stacked 6 GS1 Databar Expanded Stacked
3 GS1 Databar Stacked Omnidir.
x = Hori. of top-left position of barcode (unit: dot, 1 mm = 8 dots or 12 dots)
y = Vert. of top-left position of barcode (unit: dot, 1 mm = 8 dots or 12 dots)
narrow (x dimension) = narrow bar from 1 ~ 10 dots(0.125 ~ 1.25 mm)
Segment = the width setting of data segment from 2 ~ 22, only applied on "GS1 Data
bar Expanded Stacked". When the data length exceeds the segment setting, the
barcode will add more line automatically to contain all data. The maximum number
of barcode lines is 11.
Height = not available yet, please always enter "0".
rotation = rotation of barcode (0 ~ 3)
0) 0° 1) 90° 2) 180° 3) 270°
readable = set to show human readable text
0 – human readable off; 1 – below barcode, left
Data = barcode data, it includes Constant, Date information (^D), Time information
(^T), Serial variable (^Cx) and Variable data (^Vxx).