GoDEX EZPL - Manual (Page 19)

14
^XSET,LOCKCMD,xxxx - Command Lock function, use only hardware modifications set
Syntax
^XSET,LOCKCMD,xxxx
Parameter
Description For value protected, user only can use LCD do any value setting.
^XSET,REWINDER,n - Set Rewinder
Syntax ^XSET,REWINDER,n
Parameter n = 0, disable the rewinder
n = 1, enable the rewinder
Description Set EZ-6000Plus Rewinder enable/disable.
* Note: this command is only applied on EZ-6000Plus.
^XSET,REALLENGHTPRINT,n - Adjust label length based on label content
Syntax ^XSET,REALLENGHTPRINT,n
Parameter
n = 0, disable
n = 1, enable
Description Adjust label length based on label content
(Only support EZPL(Zebra mode).GZPL(Godex mode) in continues label)
^XSET,RECALLCRLF,n - Line feed characters include a character in recall label mode
Syntax
^XSET,RECALLCRLF,n
Parameter
n = 0, disable
n = 1, enable
Description Enable EZPL(Zebra mode) and GEPL(Godex mode). Line feed characters include a
character in recall label mode.