GoDEX EZPL - Manual (Page 34)

29
~S,n ( n = FEED, PAUSE, CANCEL, BUFCLR ) - Analogue press control keys
Syntax
~S,n
Parameter
n = FEED, same as push Feed key once.
( if the media setup is plain paper, ~S,FEED = feed 1mm)
n = PAUSE, same as Pause key. On the printers without LCD display, the LED will flash
slowly while sending this command. Send ~S,PAUSE or ~S,FEED again, it
will come back to standby status.
n = CANCEL, same as Cancel key used to clear error status.
n = BUFCLR, printer will stop printing immediately and clean printer buffer then stays
in standby status. ( Serial and Variable will be cleared as well )
Description
Current printer default = ~S,ESA (auto switch). When a printer switch to certain
language, it can auto detect and switch again by rebooting printer.
Example None
~S, ES[p1] – Change printer command language
Syntax
~S, ES[p1]
Parameter n = p1 ; p1 = A or blank : auto switch ; p1 = G : EZPL ; p1 = E : GEPL ; p1 = Z : GZPL
Description
Current printer default = ~S,ESA (auto switch). When a printer switch to certain
language, it can auto detect and switch again by rebooting printer.
Example None
~S,STATUS - Status immediate response command
Syntax ~S,STATUS
Parameter None
Description
Almost same as ~S,CHECK, the only difference is the response format of ~S,STATUS is
“aa,nnnnn
aa : please check ~S,CHECK for further explanation
nnnnn : remaining number of prints, range from 00000 to 99999
Example
Procedure :
PC to Printer ^XSET,IMMEDIATE,1
Printer action Door open
PC to Printer ~S,STATUS
Printer to PC 04,00100
**04: Door open , 00100: 100 labels waiting for printing
~T - Print head testing
Syntax ~T
Parameter None
Description Print a pattern for the user to determine if the print head is damaged. The printing is
based on width setting.
Example
Print resolute as below::
~V - Print Self-Test page
Syntax ~V
Parameter None
Description Print out the Self-Test page. The printing is based on width setting.