GoDEX EZPL - Manual (Page 13)

8
^Qx,y(,z±) - Label length
Syntax ^Qx,y(,z±)
Parameter Gap label: (See fig. 1)
x = Label length (unit: mm)
y = Gap length (unit: mm)
EX.
^Q25,3
(x=25,y=3) mm
paper feed
direction
x y
Figure 1
Plain paper:
x = Label length (unit: mm)
y = 0 (constant)
z = Feed paper length (unit: mm)
Black mark label:
x = Label length (unit: mm)
y = Black mark width (unit: mm)
z = Black line to top of form position.
z+: When the position is outside the black mark.
z-: When the position is within the black mark.
EX.
^Q25,4,3+
(x=25, y=4, z=3+) mm
^Q25,4,3-
(x=25, y=4, z=3-) mm
Description Set label size (length, gap length, [plain paper feed length])
^Rx - Row column adjustment
Syntax ^Rx
Parameter x = 0 ~ 399 dots
Description Set left margin
Example
^R08 ( move right 1mm )
^L
…..
E