GoDEX EZPL - Manual (Page 11)

6
^Mx - Set the forward length
Syntax ^Mx
Parameter x = 1~1000 (unit: mm)
Description
Set the forward length to move the position of paper.
In progress
If ~S,CHECK will feedback 00
If ~Z printer would turn on immediately
If Dooropen  RED light would up and motor would stop at the same time even
after printer cover close.
Example
Result:
PC to Printer ^M100
Printer to action co-rotating 100mm
^On - Label Dispenser (peel) / Applicator
Syntax ^On
Parameter n = 0 , disable the Label Dispenser and Applicator
n = 1 , enable the Label Dispenser, disable the Applicator
n = 2 , enable the applicator, disable the Label Dispenser (applied on EZ-2000Plus /
EZ-
6000Plus only)
(Please check with dealer whether your printer supports this function or not.)
Description Enable or disable the Label Dispenser / Applicator. When you use this command, it
should be matched with ^Ex for setting the stop position. (For the Label Dispenser
setting, please refer to page72)
Example ^O1
^L
…..
E
^PAx - Auto Print
Syntax ^PAx
Parameter x = 1~30000
Description After the recall of label, printer will read variables and Serial Number and then print
automatically for the number of copies that has been set.
Example ^Flabel1
^Q40,0,0
^PA3
^L
C0,0000001,+1,Counter
V00,15,Variable
AF,108,140,1,1,0,0,^C0
AE,122,278,1,1,0,0,^V00
E
^Klabel1
00001
Variable
E
Printer will auto print 3 pieces.