EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 447)

Referencia de instrucciones SCPI
OTDR 433
Product-Specific Commands—Description
:SOURce[1..n]:FREQuency:PRF
Description This command sets the repetition frequency of
the on-off modulation of the source signal that is
periodically switched on and off (flashing
pattern). This characteristic is referred to as
"Pulsed Repetition Frequency" (PRF).
*RST reverts this setting to its default value.
Syntax :SOURce[1..n]:FREQuency:PRF
RepetitionFrequency>|MAXimum|MINimum|D
EFault
Parameter(s) PulsedRepetitionFrequency:
The program data syntax for
is defined as a
element. The
special forms
MINimum, MAXimum and DEFault are accepted
on input.
MINimum allows to set the instrument to the
lowest supported value.
MAXimum allows to set the instrument to the
highest supported value.
DEFault allows the instrument to select a value
for the
parameter.
Pulsed Repetition Frequency (PRF) of the
source’s signal.