EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 408)

Referencia de instrucciones SCPI
394 OTDR
Product-Specific Commands—Description
:CONFigure[1..n]:ANAlysis:RBScatter
Description This command sets the Rayleigh backscatter that
will be used for the next acquisition.
*RST reverts this setting to default value.
Syntax :CONFigure[1..n]:ANAlysis:RBScatter
BS>|MAXimum|MINimum|DEFault
Parameter(s) RBS:
The program data syntax for is defined
as a element. The
special forms MINimum, MAXimum and DEFault
are accepted on input.
MINimum allows to set the instrument to the
lowest supported value.
MAXimum allows to set the instrument to the
highest supported value.
DEFault allows the instrument to select a value
for the parameter.
Sets the Rayleigh backscatter.
Example(s) CONF:ANA:RBS? Ex.: Returns –79.5
CONF:ANA:RBS –80
CONF:ANA:RBS? Returns –80