EXFO FTB-7000 OTDR Series for FTB-500 - Manual (Page 414)

Referencia de instrucciones SCPI
400 OTDR
Product-Specific Commands—Description
:CONFigure[1..n]:ANAlysis:THReshold:
SLOSs
Description This command sets the splice loss threshold that
will be used for the next acquisition.
*RST returns this setting to default value.
Syntax :CONFigure[1..n]:ANAlysis:THReshold:SLOSs
sp>
Loss>|MAXimum|MINimum|DEFault
Parameter(s) Splice Loss:
The program data syntax for is
defined as a element. The
special forms MINimum,
MAXimum and DEFault are accepted on input.
MINimum allows to set the instrument to the
lowest supported value.
MAXimum allows to set the instrument to the
highest supported value.
DEFault allows the instrument to select a value
for the parameter.
Sets the splice loss threshold.
Example(s) CONF:ANA:THR:SLOS? Ex.: Returns 0.02
CONF:ANA:THR:SLOS 0.03
CONF:ANA:THR:SLOS? Returns 0.03