Eurocom M980NU XCaliber - Manual (Page 138)

Modules
7 - 20 Wireless LAN Module
7
Wireless LAN Module
If you have included an Intel® Wi-Fi Link 5100/5300 Series (802.11 a/g/n) WLAN
module, or 3rd Party 802.11b/g WLAN module in your purchase option, make sure
that the Wireless LAN module is on before installing the driver.
Use the Fn + F11 key combination or Touch Sensor Instant Key to toggle power
to the Wireless LAN module. When the WLAN module is powered on, the
LED will be highlighted and the indicator
will briefly be displayed. Make sure
you install the drivers in the order indicated in Table 4 - 1, on page 4 - 3 . The operat-
ing system is the default setting for Wireless LAN control in Windows Vista.
The standard driver installation procedure for the Intel® Wi-Fi Link 5100/5300 Se-
ries module is outlined overleaf. If you want to include Intel® My WiFi Technol-
ogy as part of the installation procedure, DO NOT install the driver as per the
instructions overleaf, instead see
“Intel® My WiFi Installation & Configuration”
on page 7 - 25 .
If you have installed the standard driver (as per the instructions overleaf) and wish
to enable Intel® My WiFi Technology at a later point you will need to reinstall the
driver (choose Unlock from the Drivers Installer menu). Follow the driver installa-
tion procedure and choose Modify from the menu when the option appears, and then
follow the remaining installation instructions in
“Intel® My WiFi Installation &
Configuration” on page 7 - 25 .
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination/Touch Sensor Key
to toggle power to the
WLAN module, and check
the LED to see if the mod-
ule is powered on or not
(see
Table 1 - 3, on page 1
- 10 / Table 1 - 2, on page 1
- 8 ).