Eurocom M980NU XCaliber - Manual (Page 125)

Modules
RAID Setup 7 - 7
7
9. Press Tab to navigate through the menu options, the up/down arrow keys to
move up and down the drop-down menus, and Enter to select an option.
10. Any available free hard disks will appear in the menu on the left, and these may be
moved into (and removed from) the array by means of the left/right arrow keys.
11. Use the “Define a New Array” menu to:
• Select the RAID mode
• Set up the Striping Block
• Specify the hard disks to be included in the RAID Array
Selecting the RAID Mode
The default setting for the RAID Mode is “Mirrored”. This system supports both
“Mirrored” and “Striped” modes.
Assigning Disks
Use the Tab key to move to the Free Disks section and the first disk will be selected.
Use the right arrow key to move the selected disk into the Array Disks section.
Add any further disks to the Array Disks section in the same way.