Eurocom M980NU XCaliber - Manual (Page 124)

Modules
7 - 6 RAID Setup
7
7. As the computer boots up you will see the screen below if no disk array is defined
(press F10 to enter the utility).
8. The MediaShield ROM BIOS Utility will then appear (if you have not previously
set up an array then you will be presented with the “Define a New Array” menu).
Figure 7 - 2
MediaShield ROM
BIOS Startup
Figure 7 - 3
MediaShield BIOS
Define A New Array
MediaShield ROM BIOS 10.0.0.31
Copyright (C) 2008 NVIDIA Corp.
Detecting storage devices...
1
0.1 TSSTcorp CDDVDW TS-L633A
Press F10 to enter RAID setup utility ...
[ ] Add
[ ] Del
[ ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
RAID Mode : Mirrored Striping Block: Optimal
Free Disks Array Disks
Port Disk Model Capacity Port Disk Model Capacity
0.0 FUJITSU MHY212 111.79GB
0.2 FUJITSU MHZ225 232.88GB
MediaShield BIOS Mar 31 2008
- Define a New Array -