Jt20 operator’s manual – Ditch Witch JT20 User Manual
Page 85
Transport - 84
JT20 Operator’s Manual
Tow
CMW
®
Tow
Under normal conditions, drilling unit should not be towed. If unit breaks down and towing is necessary:
•
Attach chains to indicated tow points facing towing vehicle.
•
Open bypass valves.
•
Open selector valves.
•
Tow for short distances at less than 1 mph (1.6 km/h).
•
Use maximum towing force of 1.5 times unit weight.
To open bypass valves for towing, back out hex
plugs (shown) three full revolutions.
To close bypass valves and return to normal
operation, return hex plugs to their original position
(shown).
NOTICE: Unit has no brakes when bypass
valves are opened for towing.
j38om041w.eps
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)