Jt20 operator’s manual – Ditch Witch JT20 User Manual
Page 170
JT20 Operator’s Manual
Service - 169
50 Hour
CMW
®
Check Ground Drive Gearbox Oil Level
Check oil level in both ground drive gearboxes
every 50 hours.
To check:
Open check plug (2). If oil does not come out,
open fill plug (1) and add MPL until level with
check plug (2).
Check Rotation Gearbox Oil Level
Check rotation gearbox oil level every 50 hours.
Fill through plug (1) with MPL as needed.
IMPORTANT:
•
Drilling unit must be on level ground for
accurate reading.
•
Use helper to assist in positioning gearbox
plugs for checking and adding oil.
•
Do not overfill.
IMPORTANT: Drill frame must be level for
accurate reading.
j38om021w.eps
j38om022w.eps
See also other documents in the category Ditch Witch Special machinery:
- JT5 (161 pages)
- JT922 (159 pages)
- JT9 (165 pages)
- JT1220 (201 pages)
- JT2020 (203 pages)
- JT25 (203 pages)
- JT30 (245 pages)
- JT60 (218 pages)
- JT100 (243 pages)
- AT Air Hammer (11 pages)
- TK Series Manual (61 pages)
- 8500 (77 pages)
- MR90 (121 pages)
- FT5 (28 pages)
- FM5 (57 pages)
- FM13V (46 pages)
- FM25 (67 pages)
- P80 (71 pages)
- OnGrade (63 pages)
- FX20 (100 pages)
- FX25 (119 pages)
- FX30 (149 pages)
- FX50 (141 pages)
- FX60 (157 pages)
- MV800 (111 pages)
- RT Line (115 pages)
- RT30 (97 pages)
- RT45 (203 pages)
- RT55 (177 pages)
- RT100 (161 pages)
- RT115 (252 pages)
- RT120 (223 pages)
- Zahn (105 pages)
- RT80 (203 pages)
- RT115 Q (193 pages)
- RT120 Q (211 pages)
- 100SX (50 pages)
- 410SX (131 pages)
- SK350 (77 pages)
- SK750/SK755 (81 pages)
- SK850 (107 pages)
- SK850 Footings Machine (107 pages)
- 150RT (55 pages)
- 250RT (49 pages)