Ditch Witch JT20 - Manual (Page 48)

JT20 Operator’s Manual
Controls - 47
Right Control Console
CMW
®
2. Dual speed carriage
control To engage high carriage
travel speed, push and hold.
To return to normal carriage
speed, release.
To override assisted makeup
mode, push and hold.
Use during bore or pullback when no
pipe is in spindle to save time.
NOTICE: Overriding assisted makeup
mode puts pipe threads in jeopardy. If
frequent overriding is necessary, see
your Ditch Witch
®
dealer for
pipeloader adjustment.
3. Carriage control To move carriage forward,
push.
To move carriage backward,
pull.
To rotate spindle
counterclockwise (breakout),
move right.
To rotate spindle clockwise
(makeup), move left.
4. Drilling fluid quick fill
switch To override fluid control
setting for full pump flow,
press and hold.
To return fluid flow to flow
control setting, release.
5. Remote engine stop
switch To stop engine, press.
To restart engine, press
remote engine start switch on
console, or turn ignition off
and then back to start.
If this switch is used to stop drilling
unit, be sure to turn ignition switch off
if machine will be left unattended for
long periods of time. Battery
discharge can occur.
If wrenches are engaged when
remote stop is pressed, wrenches will
remain engaged but could gradually
open.
Item Description Notes