Ditch Witch JT20 - Manual (Page 140)

JT20 Operator’s Manual
Systems and Equipment - 139
Pipeloader
CMW
®
Add/Remove Single Pipe
Load a single drill pipe or up to a whole column of drill pipe into an empty column of pipe box to finish bore
without changing pipe boxes.
Electric shock. Contacting electric lines will cause death or serious injury.
Know location of lines and stay away.
To help prevent injury:
• Do not attempt to load and unload pipe while drilling or backreaming. Unprotected worker can be
injured by electric strike.
• On electrical jobsite, load and unload pipe only if grid mats are properly set up and connected to
drilling unit and loader is wearing electrically insulating boots and gloves.
Incorrect procedures could result in death, injury, or property damage.
Learn to use equipment correctly.
To help prevent injury:
• Open or close both auxiliary pipe loaders. Moving shuttles with one auxiliary pipe loader open and
one closed will damage equipment and cause possible injury.
• Carriage must be in full back position to load and unload pipe.