Ditch Witch JT20 - Manual (Page 44)

JT20 Operator’s Manual
Controls - 43
Left Control Console
CMW
®
5. AutoCarve switch To enable autocarve, press
top.
To deactivate autocarve,
press bottom.
Two-speed thrust is not allowed in
AutoCarve mode.
6. Carve window control To increase carve window
range, turn clockwise.
To decrease carve window
range, turn counterclockwise.
See “Use AutoCarve” on page 100.
7. Remote engine start
switch To start engine from
operator’s station, push
button.
Release when engine starts.
This button works only when key in
set-up console is on, operator is in
seat, and battery disconnect switch is
closed.
8. EDT Diagnostic report For use only by qualified technicians.
9. Console/Work light
switch To turn on, press top.
To turn off, press bottom.
10. Fluid pump indicator Lights when fluid pump is on.
Item Description Notes
c00ic608h.eps
c00ic609h.eps
c00ic152h.eps
c00ic151h.eps