Ditch Witch JT20 - Manual (Page 113)

Systems and Equipment - 112
JT20 Operator’s Manual
Anchor System
CMW
®
Drive Anchors
1. Use anchor rotation and thrust controls to drive
anchor into ground.
2. Carefully position centering cap (1) into centering
tube (2) as anchor is being driven into ground.
3. Repeat process for other anchor.
Remove Anchors
1. Use anchor rotation and thrust controls to slowly
remove anchor shaft from ground.
2. Repeat process for other anchor.
IMPORTANT: Carefully time anchor rotation with
anchor movement. Properly driven anchors should
not auger up soil.
NOTICE: Centering cap MUST be
positioned in centering tube to prevent
damage to anchor.