As needed, Jt20 operator’s manual – Ditch Witch JT20 User Manual

Page 180

JT20 Operator’s Manual

Service - 179

As Needed

CMW

As Needed

Change Auto Lubricator TJC Pail

Check pipe auto lubricator TJC level and change
pail as needed.

To change pail:

Remove wingnuts and bolts attaching base
ring (4) to pail cover (1).

Rotate base ring slightly to clear hooks on
cover and remove pail from cover.

Remove follower plate (3) from empty pail
and install into new pail. Press firmly on
follower plate until TJC comes up in center
opening.

Remove base ring from empty pail and install onto new pail.

Install pail into place over pump dip tube. Use hooks on cover to support base ring.

Install bolts and wingnuts.

Remove cap (2) from discharge tee on pump. Operate pump until discharged TJC is free of air
pockets. Replace cap.

Task

Notes

Change pipe auto lubricator pail

TJC

Change hydraulic filter

Any time system is opened

Check pipeloader pads

Check front pipe guide inserts

Check fluid pump ball valve

Check track tension and condition

Change/Adjust engine drive belt

Change air filter

Check saver sub

NOTICE: Use only genuine Ditch Witch

j38om016w.eps