Ditch Witch JT20 - Manual (Page 66)

JT20 Operator’s Manual
Prepare - 65
Classify Jobsite
CMW
®
Apply Precautions
Once classified, precautions appropriate for jobsite must be taken.
Electric Jobsite Precautions
In addition to using a directional drilling system with an electric strike system, use one or both of these
methods.
• Expose line by careful hand digging or soft excavation. Use beacon to track bore path.
• Have service shut down while work is in progress. Have electric company test lines before returning
them to service.
Natural Gas Jobsite Precautions
In addition to using positioning equipment upwind from gas lines, use one or both of these methods.
• Expose lines by careful hand digging or soft excavation. Use beacon to track bore path.
• Have gas shut off while work is in progress. Have gas company test lines before returning them to
service.
Crystalline Silica (Quartz) Dust Precautions
Crystalline silica dust is a naturally occurring substance found in soil, sand, concrete, granite, and quartz.
Breathing silica dust particles while cutting, drilling, or working materials may cause lung disease or
cancer. To reduce exposure:
• Use water spray or other means to control dust.
• Refer to U.S. Department of Labor Occupational Safety and Health Administration guidelines to learn
more about appropriate breathing protection and permissible exposure limits.
Other Jobsite Precautions
You may need to use different methods to safely avoid other underground hazards. Talk with those
knowledgeable about hazards present at each site to determine which precautions should be taken or if
job should be attempted.