Dillon Precision SL 900 - Manual (Page 38)

Casefeed Assembly Conversion
(Right-Rear of the Machine)
1. Remove the hulls and the clear casefeed tube
from the machine.
2. Use a 9/64" Allen wrench to remove the screw
and washer on the casefeed sleeve assembly. Remove
the 12 gauge casefeed sleeve off the casefeed body.
Fig. 8
3. From the 28 gauge conversion box, retrieve the
28 gauge casefeed sleeve and place it on the casefeed
body. Reinstall the screw and washer onto the
casefeed sleeve assembly. Note the difference in
diameter between the two pieces. Fig. 9
4. Remove the 12 gauge disc from the casefeed
bowl. Fig. 10
Both 20 and 28 gauge hulls use the small gauge
disc. Fig. 11
Fig. 11
Fig. 10
Fig. 9
Fig. 8
Fig. 7
12 ga. 28 ga.
38
SL 900, May 2007 5/21/07 11:51 AM Page 38