Dillon Precision SL 900 - Manual (Page 26)

1. Using a Dillon bin (#17125) or box, gather up
to 80 empty, fired hulls. Fig. 37
2. Always examine the hulls for rocks, dirt, mud or
other cases that may get stuck inside. Also look for
hulls that may appear stepped on or flattened. Go
ahead and squeeze them round again so they won’t
get stuck in the casefeed tube (#20536). Fig. 38
3. Pour the hulls into the casefeeder and turn the
unit on.
4. The casefeeder will run until the casefeed tube
(#20536) has filled, then shuts off automatically when
a hull trips the microswitch. Fig. 39 Insure that the
casefeed tube is fully seated into its clamp.
5. Get one box of new shotshell primers.
6. Slide the cardboard jacket back, exposing only
half of the first row of primers. Fig. 40
7. Turn the box of primers over.
8. Place the leading edge of the primer tray into
the machine’s primer feedplate (#16711). Fig. 41
9. Slide the cardboard jacket off. Helpful hint – as
you slide the cardboard jacket off, place your left-
hand index finger on the primer tray and press down
as you slide the jacket off. Fig. 42
Fig. 37
Fig. 38
Fig. 41
Fig. 42
Microswitch
Fig. 40
Fig. 39
26
SL 900, May 2007 5/21/07 11:51 AM Page 26