Chicago Gaming Medieval Madness Remake - Manual (Page 35)

INCANDESCENT EMULATION [OFF, SLOW, MED, FAST, DEFAULT: SLOW]
MMR replicates the look of incandescent lights while using LEDs. The incandescent emulation
setting allows you to adjust the speed that the LEDs turn on and off.
POPPER STRENGTH [MIN, DEFAULT, +1, MAX ]
This adjustment changes the strength of the left popper. If the ball is bouncing too much when
coming out of the popper, try turning the popper strength down.
FLIPPER STRENGTH [MIN, -16 to -1, DEFAULT, +1 to +5, MAX]
CATAPULT STRENGTH [DEFAULT, +1, +2, MAX]
This adjustment changes how fast the ball is shot from the catapult. The default value is set to
the minimum setting.
SHAKER STRENGTH [OFF, MIN, DEFAULT, MAX]
The shaker motor is activated when the catapult fires, when trolls pop up, and when the castle
is destroyed. You can increase or decrease the strength of the shaker motor during play, or turn it
off entirely.
SOLENOID STRENGTH [MIN, DEFAULT, +1, MAX ]
This setting controls then strength of the Trough Eject, Auto-Fire, Left and Right Slingshots,
and all three Jet Bumper coils.
1-1 1
SHAKER MENU – PRESS SERVICE TO ADVANCE
FLIPPER STRENGTH
DEFAULT
POPPER STRENGTH DEFAULT
CATAPULT STRENGTH DEFAULT
SOLENOID STRENGTH DEFAULT
SHAKER STRENGTH DEFAULT
SHAKER TEST – HOLD LAUNCH
OFF
BACKBOX BRIGHTNESS [-3, -2, -1, MAX, DEFAULT: MAX]
MMR allows you to adjust the brightness of the GI’s in the backbox.
The second page of the MMR System Menu allows you to adjust the strength of the
solenoids in the game.
MMR SYSTEM MENU – PAGE 2
RED, GREEN, BLUE [0 – 100]
Independently adjusting Red, Green, and Blue allows you to customize the display color.
DISPLAY COLOR [DEFAULT: GREEN]
This setting changes the color of the dot matrix display in game. There are several preset
color configurations, or you can
create a custom color.
The strength of the flipper coils is highly adjustable. This adjustment is very useful for
making Medieval Madness feel just like you remember. Th
is setting can be adjusted tooptimize
flipper strength for each location. Adjust setting up or down to increase or decrease flipper
strength to compensate for differences in line voltage.