Dolby Laboratories DP570 - Manual (Page 85)

Connector Specifications Rear-Panel Remote Port
Dolby ® DP570 Multichannel Audio Tool User’s Manual 73
B.8 Rear-Panel Remote Port
This is a 9‐pin female RS‐485 D‐connector. The pinout is SMPTE 207M
electrical/mechanical specification compatible.
B.9 10Base-T Port (Ethernet)
The Ethernet port is a standard RJ‐45 female jack provided for future use. Ethernet
communication is not currently supported.
B.10 Multichannel Analog Output
This is a 25‐pin female D‐connector. Its pinout is similar to a Tascam DA‐88 connector
except that output channels are referring to speakers instead of channel numbers.
6 Ground
7 RX B asynchronous data out a +
8 TX A asynchronous data in a –
9 Shield
a. See the note on DCE equipment on page 71.
Table B-4 Rear-Panel Remote Port Pinout
Pin Connection
1 Shield
2 TX B asynchronous data in a –
a. See the note on DCE equipment on page 71.
3 RX A asynchronous data out a +
4 Ground
5 NC
6 Ground
7 TX A asynchronous data in a +
8 RX B asynchronous data out a –
9 Shield
Table B-5 Multichannel Analog Output Pinout
Pin Connection Pin Connection
1 Bsr + Out 14 Bsr – Out
2 Bsr Ground 15 Bsl + Out
3 Bsl – Out 16 Bsl Ground
4 Rs + Out 17 Rs – Out
Table B-3 Metadata Output Port Pinout <~Figure>(continued)
Pin Connection