Dolby Laboratories DP570 - Manual (Page 74)

62 Dolby ® DP570 Multichannel Audio Tool User’s Manual
Configuring a Monitor System Assigning Monitor System Configuration Settings
Figure A-2 Monitor Setup Tab
A.1.2 Selecting Analog Outputs
The system automatically detects the presence of the Cat No. 548 Analog Outputs Card,
and checks the Analog Outputs box when it is present. Uncheck the box if you do not wish
to use them. If you uncheck the box, all the settings in this area will be grayed out and
unavailable.
A.1.3 Choosing Bass Management Settings
If you have a 5.1‐channel monitor system with full‐range speakers at every channel and a
subwoofer, you may not need to use bass management, and can leave this feature at the
factory default, None. When no bass management is selected, only the LFE channel is sent
to the subwoofer.
If you have any other speaker configuration you should choose appropriate settings for
Bass Management, Subwoofer Crossover, and LFE Monitor Mode. Use the controls
shown in Figure A‐3.
For example:
• If your monitoring system consists of five satellite speakers and a subwoofer, you can
redirect the low frequencies from the five main channels to the Subwoofer output.