Dolby Laboratories DP570 - Manual (Page 49)

Using the DP570 Features Channel Mapping and Input Routing
Dolby ® DP570 Multichannel Audio Tool User’s Manual 37
For an example of monitoring a Dolby Surround program while creating metadata for a
5.1‐channel program, see
Using the DP570 in Postproduction on page 53.
4.12 Channel Mapping and Input Routing
Table 4‐3 shows how the DP570 routes input channels to emulator output channels.
Channel mapping changes automatically according to the program configuration, and
reflects how the channels will be connected to a Dolby Digital encoder.
The DP570 input router enables you to reroute input channels to conform to the
automatically assigned channel mapping.
The program number (1–8) identifies the individual programs associated with each
channel. So, the entry 2C/2S means ʺProgram 2, Center channel/Program 2, Surround
channel.”
Table 4-3 Input Channel Routings
Program
Configuration
1/2 3/4 5/6 7/8
5.1 + 2 1L/1R 1C/1LFE 1Ls/1Rs 2L/2R
5.1 + 2 × 1 1L/1R 1C/1LFE 1Ls/1Rs 2C/3C
4 + 4 1L/1R 1C/1S 2C/2S 2L/2R
4 +2 × 2 1L/1R 1C/1S 3L/3R 2L/2R
4 + 2 + 2 × 1 1L/1R 1C/1S 3C/4C 2L/2R
4 + 4 × 1 1L/1R 1C/1S 4C/5C 2C/3C
4 × 2 1L/1R 3L/3R 4L/4R 2L/2R
3 Ч 2 + 2 Ч 1 1L/1R 3L/3R 4C/5C 2L/2R
2 Ч 2 + 4 Ч 1 1L/1R 3C/4C 5C/6C 2L/2R
2 + 6 × 1 1L/1R 4C/5C 6C/7C 2C/3C
8 × 1 1C/2C 3C/4C 5C/6C 7C/8C
5.1 1L/1R 1C/1LFE 1Ls/1Rs None
4 + 2 1L/1R 1C/1S None 2L/2R
4 + 2 × 1 1L/1R 1C/1S None 2C/3C
3 × 2 1L/1R 3L/3R None 2L/2R
2 Ч 2 + 2 Ч 1 1L/1R 3C/4C None 2L/2R
2 + 4 × 1 1L/1R 4C/5C None 2C/3C
6 × 1 1C/2C 3C/4C 5C/6C None
4 1L/1R 1C/1S None None
2 + 2 1L/1R None None 2L/2R
2 + 2 × 1 1L/1R None None 2C/3C
4 × 1 1C/2C 3C/4C None None