Dolby Laboratories DP570 - Manual (Page 83)

Dolby ® DP570 Multichannel Audio Tool User’s Manual 71
Appendix B
Connector Specifications
This appendix gives specifications and pinouts for all the connectors used on the DP570,
and the cables that can be used to connect to it.
B.1 Front-Panel Remote Connector
Table B‐1 shows the pinout for the front‐panel RS‐232 connector.
B.2 Digital Audio Inputs
The digital audio inputs are BNC unbalanced female connectors compliant with
AES‐3id‐1995/SMPTE 276M specifications.
B.3 Digital Audio Outputs
The digital audio outputs are also BNC unbalanced female connectors compliant with
AES‐3id‐1995/SMPTE 276M specifications.
Table B-1 Front-Panel Remote Connector Pinout
Pin Connection
1 NC
2 NC
3 RX asynchronous data out
4 Ground
5 TX asynchronous data in
6 NC
7 NC
8 Sense select front panel
Note: This unit is Data Communications Equipment (DCE). In accord with the RS‐232
specifications, the data output pin of this port is therefore labeled RX even though
asynchronous data is leaving the device through this connection. The RX pin on this
unit should be connected to the RX pin on Data Terminal Equipment (DTE) such as
a PC com port. Similarly the input pin on this device is labeled TX, and should be
connected to the TX pin on a PC or other DTE device.