ADLINK cPCI-3970 Series - Manual (Page 147)

IPMI User Guide 133
cPCI-3970
9.3 OEM Commands Summary Table
System Life Time
This command is used to get the period of System Life Time. The
units are hours.
Statistics of Power Cycle
This command records the causes of power cycles and times of
each occurence.
Command NetFn Code Cmd Code
System Life Time App (18h) 56h
Statistics of Power Cycle App (18h) 57h
Voltage Detection from Internal Sensor App (18h) 58h
Thermal Detection App (18h) 59h
Voltage Detection from External
Sensor
App (18h) 5Ah
System Power Status App (18h) 5Bh
BIOS Operation Status App (18h) 5Ch
Action Byte Value Description
Request
0 18h NetFn/LUN
1 56h Defined command
Response
0 Complete Code 00h means OK
1:4 System Life Hours
Shows the period of system
activation after system is initiated.
LS byte last.
Action Byte Value Description
Request
0 18h NetFn/LUN
1 57h Defined command