ADLINK PCI-8158 - Manual (Page 19)

Installation 9
2 Installation
This chapter describes how to install the PCI-8158. Please follow
these steps below:
X
Check what you have (Section 2.1)
X
Check the PCB (Section 2.2)
X
Install the hardware (Section 2.3)
X
Install the software driver (Section 2.4)
X
Understanding the I/O signal connections (Chapter 3) and
their operation (Chapter 4)
X Understanding the connector pin assignments and wiring
the connections (the remaining sections)
2.1 Package Contents
In addition to this User’s Guide, the package also includes the fol-
lowing items:
X PCI-8158: advanced 8-axis Servo / Stepper Motion Control
Card
X
ADLINK All-in-one Compact Disc
The terminal board is an optional accessory. This would not be
included in PCI-8158 package.
If any of these items are missing or damaged, contact the dealer
from whom you purchased the product. Save the shipping materi-
als and carton to ship or store the product in the future.