ADLINK PCI-8158 - Manual (Page 114)

104 MotionCreatorPro
10.Current Position:
Z
Command: displays the value of the command counter.
The related function is _8158_get_position().
11.Velocity: The absolute value of velocity in units of PPS.
The related function is _8158_get_current_speed().
12.Play Key:
Left play button: Clicking this button will cause the 8158 start
to outlet pulses according to previous setting.
Z In “Absolute Mode”, it causes the axis to move to
position1.
Z
In “Relative Mode”, it causes the axis to move forward.
Right play button: Clicking this button will cause the 8158
start to outlet pulses according to previous setting.
Z
In “Absolute Mode”, it causes the axis to move to
position2.
Z In “Relative Mode”, it causes the axis to move back-
wards.
Stop Button: Clicking this button will cause the 8158 to decel-
erate and stop. The deceleration time is defined in “Decel.
Time.” The related function is _8158_sd_stop().
13.Buttons:
Z
Axis0 Reset: clicking this button will set all positioning
counters of selected axis to zero. The related functions
are:
_8158_set_position()
_8158_set_command()
_8158_reset_error_counter()
_8158_reset_target_pos()
Z
Axis1 Reset: clicking this button will set all positioning
counters of selected axis to zero.
Z
ClearPlots: Clear the Motion Graph.
Z
Save Config: Save current configuration to 8158.ini and
8158MC.ini.
Z Close: Close the menu.