Aiwa XR-M35 - Manual (Page 9)

PRESETTING STATIONS
■0-9,
+10
The unit can store a total of 32 preset stations. (Each band has
a maximum of 20 available preset stations.) When a station is
stored, a preset number is assigned to the station. Use the preset
numoer to tune in to a preset station directly.
1
Press theTUNER/BAND button to select a band.
Then, press the ◄◄ or ►► button to select a
station.
2 Press the II button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
/ / /!
i i I
..............................
I i I ; I / ; ; i '
; .; ! ; / / i
Preset number
3
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already been stored.
Use the remote control to select the preset number directly.
1 Press theTUNER/BAND button to select a band.
2 Press the numbered buttons to select a preset
number.
Example:
To select preset number 15, press the +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Other methods to tune in to a preset station
Press the TUNER/BAND button to select a band. ,
Then follow any one of the methods described below to select a
station.
• Press the button repeatedly.
• Press the ► button on the remote control repeatedly.
Each time the button is pressed, station with the next higher
number is selected.
• Turn the MULTI JOG dial.
Turning the dial right selects the next higher number. Turning
it left selects the next lower number.
To clear a preset station
Select the preset number of the station to be cleared. Then,
press the H button, and press the
II button within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
PRESET NUMBER TUNING
O
P
□.
UJ
o
LU
QC
o
Q
<
CC
ENGLISH
8