Aiwa XR-M35 - Manual (Page 13)

MUSIC SENSOR
If there is a 4-second or longer blank between each track, a
search for the beginning of the current or next track during
playback can be done easily.
Whe n the [> indicator on the dispiay is appearing, press the
button to move to the next track or the ◄◄ button to move
to the beginning of the current track.
Whe n the <3 indicator on the dispiay is appearing, press the
◄◄ button to move to the next track, or the ►► button to move
to the beginning of the current track.
The search function may not be able to detect tracks under the
foilo'/ving conditions:
• Blanks of less than 4 seconds between tracks
• Noisy blanks
• Long passages of low-end sound
• Low overall recording levels
About cassette tapes
• To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
O
<
QQ
Ì
a.
HI
Q.
iS
To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type II tapes, take care not to cover
the Type II tape detection slot.)
' 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
’ Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
DOLBY NR system
The Dolby Noise Reduction system reduces tape hiss noise.
For optimum performance when playing back a tape recorded
with the DOLBY NR system, turn on the DOLBY NR system.
ENGLISH
1 2