Information) – ADI Systems AT-201 User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

(information)

• A “PAG" on the display stops flashing and remains turned on

when any operating button is pressed.

• Press the Function button to stop the beep sound halfway.

• A group code will be transmitted when the PTT button is

pressed with M3 (your own individual code) selected (This is

an improper operation).

• An unidentified code received will appear on the display

when the reception is incomplete and the individual code of

the paging station is not clear. Therefore, the paging station

cannot be identified.