9j changing a call frequency, 9) changing a call frequency to the vfo, Moving a call frequency to the vfo [c/vscac button – ADI Systems AT-201 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8
Moving a Call Frequency to the VFO
[C/VSCAC Button]
Press the C/VSCAN button in the call frequency mode. The
Transceiver will be set to the dial frequency mode with the
displayed call frequency remain unchanged. That is, the
displayed call frequency becomes the operating frequency.
This is called the call-shift operation.
(information)
Press the */ MR/NET button if you do not want call-shift
operation. The dial-frequency displayed before the Transceiver
is set to the call frequency mode will be returned.
call frequency mode
1
~
.
U C D
I
'
/ f
I
9j Changing a Call Frequency
The stored frequency in call memory can be changed by
overwriting the new figure.
Example: To change the call frequency to 145.16MHz.
( Procedure)
a)
Set the displayed dial-frequency 145.16 MHz with the
numeral buttons or the rotary channel selector.
b)
Press the
*/
MR /ENT button while pressing the Function
button. “M” will appear on the display.
c)
Press the call button. The long beep tone will be generated
informing you that the call frequency is altered.
d)
Press the */ MR /ENT button to return to the dial-frequency
mode when the operation is complete.
21